Frequently Purchased Together
$
0.00
All Steel Unassembled Bookcases, Expandable Bookcases
Unassembled bookcases (bookshelves) offer the ultimate in flexibility and value. Shipped to you knocked down, assembly is easy and the unique, removable end panel design adapts easily for growth. Double wall construction keeps materials from slipping behind the upright. Shelves pull out easily from the front to allow for easy adjustability. Reinforced shelf holds up to 200 lbs., evenly distributed. Slotted shelves allow for adjustable dividers to be placed where desired. 34-5/8“ inside width provides a large filing space. Raised base keeps materials from mops or cleaning solutions. Easy assembly.
Unassembled Bookcases available in 2, 3, 5 and 7 openings. All bookcases are 38" wide and 12" deep. We make assembly easy and effortless using only one tool, a nut driver with a screwdriver insert, included with every unit shipped. All units have backs and come standard with one divider per opening. Available with starter & add-on options. Order one unit with end panels, then add-on units without end panels. Bookcases can be easily expanded.
Shelves adjust easily in 1½" increments without removing or adjusting other shelves.
Raised Base keeps books and files off the floor to prevent damage from cleaning solutions and equipment.
Bookcases come standard with one adjustable divider per shelf. Additional dividers are available.
All units have backs. All units come standard with one divider per opening. Bookcases can be easily expanded. Order one unit with end panels, then add-on units without end panels. End panels are required only at ends of row. Shelf capacities up to 200 lbs. per shelf, evenly distriuted.
Standard Colors: Sand, Medium Grey, Light Grey, Champagne/Putty and Black (see more options below).
QUICKSHIP COLORS: Sand, Medium Grey, Light Grey, Champagne/Putty and Black.
Usually available for shipment in two to five business days.
NOTE: Freight and inside delivery required additional quotation. Please contact us at 1-888-891-1970 or email at sales@filingtoday.com for more information. Frieght Class 70.
Unassembled Bookcases, Bookshelves Specifications
Ready to Assemble - Shipped knocked down, units can be easily assembled on site.
Heavy Duty - Reinforced shelf holds up to 200 pounds.
Dividers - Units come standard with one divider per shelf. Additional dividers are available.
Extra Capacity - 34-5/8" inside width provides plenty of fiing space.
Easy Adjustability - Shelves pull out easily from the front for easy adjustment with no need to disturb materials from surrounding shelves.
Slotted for Dividers - Shelves are slotted in 1" increments for optimum placement of dividers.
Double Wall Construction - Keeps materials from slipping behind the upright.
Easy to Expand - Starter and adder units make installing additional units easy. Extra shelves can be added for further expansion.
Raised Base - Keeps materials safe from mops and damaging cleaners.
KD Bookcases (unassembled) Specifications
Materials: KD Bookcases are fabricated of high quality, cold rolled carbon steel, free of scale or rust and fully pickled. Exposed edges, corners and surface areas are free of sharp edges and all workmanship is of the highest quality as measured by the industry.
Finish: All steel components shall be thoroughly cleaned and phosphatized for rust resistance in a five-stage pre-treatment process. A high grade of polyester/epoxy powder paint is to be applied electrostatically with a gloss reading of between 55 and 65. The finish shall have a salt spray rating of 250 hours or more.
Uprights: One upright is required for each side. They are made from 19 gauge, commercial grade, cold rolled steel. They have two rows of slots from top to bottom, every 1-1/2", to receive the shelves. Holes are provided for assembly with screws.
End Panels: End panels are stamped from 22 gauge cold rolled steel, front edge is double bent, rear has a single flange. All holes are provided for screw assembly. The panels are enamel painted. They are only required for end uprights.
Back: The back is stamped from 20 gauge flat, cold rolled steel, with holes for assembly, and painted with enamel.
Top: The top is made from 20 gauge cold rolled steel, with a double bend on the front edge. There are two brackets welded to the top near the front to fasten the top of the uprights. This results in a very strong corner construction.
Shelves: Shelves are made from 20 gauge cold rolled steel, front and back edges are double bent for strength. Two inch long slots are punched in the center of the shelf from end to end, spaced 1" apart, these are used with the dividers. Shelves have a welded hat channel, slotted to match the shelf and used also to support the dividers. The shelf has four stops to lock it into the slots of the uprights.
Base: The base is formed from 20 gauge cold rolled steel, is 3" high and used as the bottom shelf. It also has the row of slots 3/32" x 2", spaced 1" apart to support the dividers. It’s underside has an identical hat section welded to it, with slots aligned to support the dividers. All holes are provided for assembly.
Bookstops and Dividers: Stamped from 16 gauge cold rolled steel to fit into the slots of the shelves and base.
Tie Plates: Both front and rear tie plates are made from 16 gauge cold rolled steel and pierced to accept Tinnerman Nuts.