30 Wide 6 Openings - 300 Series Stak-N-Lok Cabinets LFI 171 Inside clear height letter and legal 10-3 8 binder 12-3 8 6 Openings Locking

30" Wide 300-Series Stak-N-Lok™ Filing Cabinets Filing cabinets 300 series Stak-N-Lok™ has a lock located above the third tier, while the spacer maintains an even height when the unit is used in conjunction with 200 series cabinets. All steel filing cabinets for end-tab files, side-tab files, binders, letter and legal size folders. View Specifications. 300 series Stak-N-Lok™ has a lock located above the third tier, while the spacer maintains an even height when the unit is used in conjunction with 200 series.All 300 Series cabinets are pre-assembled* at the factory and are available with or without a lock. Units for letter and legal media are available from 5 to 7 openings high and units for binder media are available from 5 to 6 openings high. *7 high units are shipped in 2 pieces and require partial assembly. 300 Series cabinets feature a Spacer above the third tier. The Spacer provides uniform cabinet height for 300 series when positioned adjacent to a 200 series cabinets. Locks are positioned above the third tier and are keyed alike. To specify keyed differently, add the suffix "D". "-NL" at the end of the Item # below denotes non-locking doors. One receding door per opening is standard and doors are gang locked (one key locks all doors simultaneously). All units include two adjustable file dividers per opening, additional dividers may be ordered (Item #SNPD8, $33.00 pack of 8 dividers). Four adjustable leveling glides are included. Inside clear height on letter and legal depths is 10-3/8"; binder size, 12-3/8". Additional tiers may be added onto Stak-N-Lok™ cabinets when required. Finish: All steel parts are thoroughly cleaned using a three-stage iron phosphate washer and then coated with an Epoxy-Hybrid powder coat finish using a state-of-the-art electrostatic paint system. Powder coating provides a superior, attractive, uniform finish that is more durable, scratch and corrosion resistant, and environmentally friendly than liquid paint. NOTE: Freight and inside delivery required additional quotation. Please contact us at 1-888-891-1970 or email at sales@filingtoday.com for more information. Stak-N-Lok™ Filing Cabinet Specifications End Tab (Side Tab), File Binders Storage Cabinets Material and Workmanship: All Stak-N-Lok™ units are manufactured from high quality, cold rolled steel, free of scale or rust. Exposed edges, corners and surface areas are free of any sharp edges. Assembly: All components come fully assembled. Individual tiers are packaged one per box . Except 7 Tier units will be shipped in 2 pieces, one piece will be 4- high with base and the second will be a 3- high with top. Click here for standard assembly instructions. Click here for 7-tiers assembly instructions. TierSides: The sides and back of each tier section are manufactured from a single piece of 20 gauge cold rolled steel, formed to make three sides incorporating a continuous 3/4" flange on the top and bottom. Shelf: The tier shelf is manufactured from 20 gauge cold rolled steel. The front edge of the shelf has a 1/2" lip with a 1/2" return bend for maximum strength. The shelf is further reinforced with a 20 gauge welded steel channel along its entire length. The tier shelves are punched to include two tabs on the base, and one tab located in the rear. Each shelf includes a 18 gauge slotted formed channel welded to the inside of the tier. The rear tab of the adjustable dividers lock into this channel. Channels include slots punched on 2" centers that correspond to slots on shelves. Divider: Each opening or tier section includes two adjustable file dividers, manufactured from 20 gauge cold rolled steel and powder coat finished to match cabinet color. Dividers can be positioned on 2" centers along the entire shelf length. Door: The fully recessed door of each section is manufactured from 20 gauge cold rolled steel with a 5/8" edge and a 1/2" return bend. The door is also reinforced with a 20 gauge welded steel channel. Each door pivots on two 3/16" hardened steel pins and glides on two non-marring nylon pads. Each door also has two rubber pads to quiet its operation when being closed. Top: The top of each Stak-N-Lok™ unit is manufactured of 20 gauge cold rolled steel and is welded to the upper opening. Base: The base of each unit is manufactured from a single piece of 16 gauge cold rolled steel and includes four 5/16" x 18 threaded leveling domes. Lock: Locking Stak-N-Lok™ units are gang locked using dual 14 gauge lock bars which are mounted in the 3/4" side channels. The lock is typically located in the top section and can be re-keyed in the field. Finish: All steel parts are thoroughly cleaned using a three-stage iron phosphate washer and then coated with an Epoxy-Hybrid powder coat finish using a state-of-the-art electrostatic paint system. Powder coating provides a superior, attractive, uniform finish that is more durable, scratch and corrosion resistant, and environmentally friendly than liquid paint.