LETTER STARTER 5 shelves 4 openings 64-1 4 H
Frequently Purchased Together
4-Post™ 64-1/4" High, 22 Gauge, 5 Shelves, 4 Openings Shelving 4Post™ Shelving gives you the ability to create a uniquely customized storage system by incorporating both "L" and "T" shaped uprights. Weight isn't an issue, thanks to double rivet shelf supports and optional shelf reinforcement. Combine 4Post™ shelving with a TrakSlider™ or MobileTrak5® System to make the most of your available space. 1 starter & 1 adder. Dividers are optional, see below for prices. 5 Shelves, 4 Openings shelving units for letter and legal size filing. All shelves are placed on 13-1/2" centers for 12-3/4" clear vertical height. Available in the numerous standard sizes(letter, legal, x-ray & library) L&T 4 Post shelving units can range from 40" to 10' in height and from 9" to 36" in depth. Available shelf sizes include 24", 30", 36", 42" and 48" wide options. Shelves are 22 gauge designed for record storage. 18 gauge shelves are available.
Letter and Legal Size Depth, Preconfigured 64-1/4" High, 22 Gauge, 5 shelves, 4 openings All shelves are placed on 13-1/2" centers for 12-3/4" clear vertical height. Shelf supports are adjustable on 1-1/2" centers. Dividers are optional, see below for prices. ALL UNITS SHIP KNOCKED DOWN AND BULK PACKED. * Includes one shelf reinforcement per shelf. ** Includes two shelf reinforcements per shelf. Shelf reinforcements are not included for top shelf. Top shelves are unslotted and include prepunched knockout holes for TrakSlider hardware attachment. All starter units include 2 closed "L" uprights and all adder units include 1 open "T" upright. All units include 64-1/4" high uprights, and 2" high front base. NOTE: Freight and inside delivery required additional quotation, please fill out Shipping Quote Form (pdf). Contact us at 1-888-891-1970 or email at firstname.lastname@example.org for more information. 4-Post™ Shelving General Information & Specifications Product Description: Our Standard and Medium Duty Shelving L&T 4 Post shelving units can range from 40" to 10' in height and from 9" to 36" in depth.offers exceptional strength and durability for a variety of storage applications. 4Post shelving incorporates both “L” & “T” shaped uprights allowing for a variety of shelving configurations. Interlocking keyhole uprights combined with double rivet shelf supports are designed to offer maximum strength and durability with exceptional versatility. All shelf units are assembled without the use of nuts, bolts, or clips and are available for both single entry (wall unit) and double entry (back to back storage) allowing for maximum filing/storage capacity with minimal floor intrusion. Shelves are available slotted to accept adjustable file dividers. All shelf units are designed for expansion and are available as mobile ready for easy conversion to TrakSlider™ systems. 4Post Shelving is ready to assemble with no special tools required. Available depths make it an ideal choice for letter, legal, binder, and book storage applications. SPECIFICATIONS Open Uprights: Are 18 gauge cold rolled steel, roll formed into a 2" wide “T” upright with keyhole slot holes punched on 1-1/2" centers on inner wall of upright only. There are no holes on the exterior portion of the upright. Front and rear posts are joined together with a minimum of three 3" high 18 gauge spacers maintaining proper upright spacing along the entire length of the upright and adds rigidity and strength. The open “L” upright is typically used for row ends with Open “T” uprights used as a common upright between shelf units. All uprights include an identifiable pair of punched holes every 6" on center allowing a visual confirmation for proper shelf spacing. Closed Uprights: Includes same specifications as the Open Uprights except welded spacers are replaced with a welded 24 gauge full height closure sheet incorporating a 5/8" wide stiffener flange at the bottom of the closure sheet. Standard Duty Shelves: Shelves are formed of 22 gauge cold rolled steel with a 3/4" flange on all sides. Front and Back shelf sides to include a 9/32" stiffener flange for added strength. Shelves are available plain or with slots punched on 2" centers to accept adjustable file dividers. Medium Duty Shelves: Include same specification as Standard Duty Shelving except shelves are formed of 18 gauge cold rolled steel. TrakSlider Standard Duty Tops: Tops are formed of 22 gauge cold rolled steel with a 3/4" flange on all sides. Front and Back top sides to include a 9/32" stiffener flange for added strength. All tops are prepunched with knock-outs to accept TrakSlider overhead anti-tip mounting hardware. Shelf Support: Shelf supports are formed of 14 gauge (11 gauge for 42" and 48" widths) hot rolled pickled steel 3/4" high. Each support end is formed flat and includes two shoulder rivets with 7/16" diameter heads for attachment to corresponding keyholes in upright. Shelf supports are available with single or double rivets. All single rivet shelf supports are designed to sit flush with bottom of shelf upright and are prepunched to align with holes on our TrakSlider carriages for easy attachment. Shelf Reinforcement: Shelf reinforcements are formed of 13 gauge hot rolled, pickled steel and formed into a channel shape. Shelf reinforcements are notched on each end and align with respective shelf support. Back Stops: Back stops are formed of 18 gauge cold rolled steel with a 7/16" channel at the top and similar bend at the bottom and are slotted on the face. Slots on Back stops are punched on same centers as the shelf and are used to accept back tab of adjustable file divider. Ends of Back stop include one shoulder rivet with 7/16" diameter head for attachment to corresponding keyholes in upright. Back stops are used for single entry shelving only. Center Stops: Center stops are formed of 20 gauge cold rolled steel with a 9/16" formed channel on the top and a 9/16" return bend on the bottom. Formed channels on the top are punched on same centers as the shelf and are used for back to back support of adjustable divider. The overall height of center stop is 4" and includes mounting holes on bottom flange for easy assembly using 1/4" nuts and bolts. Center stops are used for double entry shelving only. Kick Plate: Kick Plates are formed of 14 or 16 gauge cold rolled steel formed with a stiffener flange on top and bottom edge. Kick Plates are available in 2" and 4" heights. Adjustable File Dividers: File dividers are formed from 20 gauge cold rolled steel. Dividers are punched to include two tabs on the base and one located on the rear. File dividers can only be used with Back or Center stops. Sectional Backs: Sectional backs are formed of 20 gauge cold rolled steel, positioned on the inner rear post, and are securely held in place by a formed retainer flange positioned between the shelf support and post. Each back section will include a formed channel on the top and bottom and include punched holes for joining sections together. Backs of 40" high are one-piece, 64" high are two-piece, and up to 97" are of three-piece construction. Sectional back panels will add 3/8" to overall depth of shelving. Pull Out Reference Shelves: Pull out reference shelves shall be formed of 20 gauge cold rolled steel and attach to underside of shelf supports. Pull out reference shelves operate on full extension ball bearing suspensions and are available to mount on single or double entry shelving. Finish: All steel parts are thoroughly cleaned using a three-stage iron phosphate washer and then coated with an Epoxy-Hybrid powder coat finish using a state-of-the-art electrostatic paint system. Powder coating provides a superior, attractive, uniform finish that is more durable, scratch and corrosion resistant, and environmentally friendly than liquid paint. FOR MOBILE READY SHELVING • Add “M" to the end of the model number when ordering mobile ready shelving. For example: 641224-A4M. Please contact us at 1-888-891-1970 or email at email@example.com for more information. • Single rivet shelf supports replace front Kick Plate and standard support on bottom shelf allowing for easy attachment to mobile carriages. • Holes are prepunched into single rivet support to match up with corresponding holes on our TrakSlider carriages. • When ordering mobile ready shelving to be used in conjunction with our TrakSlider Systems please contact us for additional hardware needs.