STARTER - 18 GAUGE X-Ray SHELVING 88-1 4 High 6-Shelves 5-Openings

X-Ray Files Filing 4-Post Shelving, 88-1/4" High, 6-Shelves, 5-Openings, 18 Gauge, Preconfigured Units All units include 88-1/4" high uprights, and 2" high front base. All shelves are placed on 16-1/2" centers for 15-1/4" clear vertical height. Shelf supports are adjustable on 1-1/2" centers. Specify Paint Options (pdf). Dividers are optional, NOTE: Freight and inside delivery required additional quotation, please fill out Shipping Quote Form (pdf). Contact us at 1-888-891-1970 or email at sales@filingtoday.com for more information. • ALL UNITS SHIP KNOCKED DOWN AND BULK PACKED. ** Includes two shelf reinforcements per shelf. † Includes three shelf reinforcements per shelf. § Includes four shelf reinforcements per shelf. • Shelf reinforcements are not included for top shelf. • All starter units include 2 closed "L" uprights and all adder units include 1 closed "T" upright. • Shelves are 18 gauge (heavy-duty) designed for X-Ray file jacket storage. • Top shelves are unslotted and include prepunched knockout holes for TrakSlider hardware attachment. Optional Dividers to be used with single and/or double entry slotted X-Ray shelves. FOR MOBILE READY SHELVING • Add "M" to the end of the model number when ordering mobile ready shelving. For example: 881824-A5M. Please contact us at 1-888-891-1970 or email at sales@filingtoday.com for more information. • Single rivet shelf supports replace front Kick Plate and standard support on bottom shelf allowing for easy attachment to mobile carriages. • Holes are prepunched into single rivet support to match up with corresponding holes on our TrakSlider carriages. • When ordering mobile ready shelving to be used in conjunction with our TrakSlider Systems please contact us for additional hardware needs. 4-Post™ X-Ray Files Shelving General Information & Specifications Our 4Post X-Ray File Size Shelving gives you the ability to create a customized storage system by incorporating both “L” and “T” shaped uprights. Weight isn't an issue, thanks to double rivet shelf supports and optional shelf reinforcement. Filing solutions for X-ray size folders, X-ray file jackets, X-ray films, medical records and more. GENERAL INFORMATION Product Description: Our X-Ray Files Storage Shelving offers exceptional strength and durability making it an ideal choice for heavyweight X-Ray jacket applications. 4Post Shelving incorporates both “L” & “T” shaped uprights allowing for a variety of shelving configurations. Interlocking key-hole uprights combined with double rivet shelf supports are designed to offer maximum strength and durability with exceptional versatility. All shelf units are assembled without the use of nuts, bolts, or clips and are available for both single entry (wall unit) and double entry (back to back storage) allowing for maximum filing/storage capacity with minimal floor intrusion. Shelves are available slotted to accept adjustable file dividers. All shelf units are designed for expansion and are available as mobile ready for easy conversion to TrakSlider™ Systems. 4Post Shelving is ready to assemble with no special tools required. SPECIFICATIONS Open Uprights: Are 18 gauge cold rolled steel, roll formed into a 2" wide “T” upright with keyhole slot holes punched on 1-1/2" centers on inner wall of upright only. There are no holes on the exterior portion of the upright. Front and rear posts are joined together with a minimum of three 3" high 18 gauge spacers maintaining proper upright spacing along the entire length of the upright and adds rigidity and strength. The open “L” upright is typically used for row ends with Open “T” uprights used as a common upright between shelf units. All uprights include an identifiable pair of punched holes every 6" on center allowing a visual confirmation for proper shelf spacing. Closed Uprights: Includes same specifications as the Open Uprights except welded spacers are replaced with a welded 24 gauge full height closure sheet incorporating a 5/8" wide stiffener flange at the bottom of the closure sheet. X-Ray Shelves: Shelves are formed of 18 gauge cold rolled steel with a 1-1/8" flange on all sides. Front and Back shelf sides to include a 9/32" stiffener flange for added strength. Shelves are available plain or with slots punched on 2" centers to accept adjustable file dividers. TrakSlider Standard Duty Tops: Tops are formed of 18 gauge cold rolled steel with a 1-1/8" flange on all sides. Front and Back top sides to include a 9/32" stiffener flange for added strength. All tops are prepunched with knock-outs to accept TrakSlider overhead anti-tip mounting hardware. Heavy Duty Shelf Support: Shelf supports are formed of 11 or 14 gauge (11 gauge for 42" and 48" widths) hot rolled pickled steel 1-1/8" high. Each support end is formed flat and includes two shoulder rivets with 7/16" diameter heads for attachment to corresponding key holes in upright. Shelf supports are available with single or double rivets. All single rivet shelf supports are designed to sit flush with bottom of shelf upright and are prepunched to align with holes on our TrakSlider carriages for easy attachment. Heavy Duty Shelf Reinforcement: Shelf reinforcements are formed of 13 gauge hot rolled, pickled steel and formed into a channel shape. Shelf reinforcements are notched on each end and align with respective shelf support. Slotted X-Ray Back Stops: Back stops are formed of 18 gauge cold rolled steel with a 7/16" channel at the top and similar bend at the bottom and are slotted on the face. Slots on Back stops are punched on same centers as the shelf and are used to accept back tab of adjustable file divider. Ends of Back stop include one shoulder rivet with 7/16" diameter head for attachment to corresponding keyholes in upright. Back stops are used for single entry shelving only. Slotted X-Ray Center Stops: Center stops are formed of 18 gauge cold rolled steel with a 9/16" formed channel on the top and a 9/16" return bend on the bottom. Formed channels on the top are punched on same centers as the shelf and are used for back to back support of adjustable divider. The overall height of center stop is 7" and includes mounting holes on bottom flange for easy assembly using 1/4" nuts and bolts. Center stops are used for double entry shelving only. Kick Plate: Kick Plates are formed of 14 or 16 gauge cold rolled steel formed with a stiffener flange on top and bottom edge. Kick Plates are available in 2" and 4" heights. Adjustable File Dividers: X-Ray dividers are formed from 18 gauge cold rolled steel. Dividers are punched to include two tabs on the base and one located on the rear. X-Ray file dividers can be used with X-Ray Back and Center stops only. Sectional Backs: Sectional backs are formed of 22 gauge cold rolled steel, positioned on the inner rear post, and are securely held in place by a formed retainer flange positioned between the shelf support and post. Each back section will include a formed channel on the top and bottom and include punched holes for joining sections together. Backs of 40" high are one-piece, 64" high are two-piece, and up to 97" are of three-piece construction. Sectional back panels will add 3/8" to overall depth of shelving. Finish: All steel parts are thoroughly cleaned using a three-stage iron phosphate washer and then coated with an Epoxy-Hybrid powder coat finish using a state-of-the-art electrostatic paint system. Powder coating provides a superior, attractive, uniform finish that is