Frequently Purchased Together
$
0.00
Open Shelf Filing - Imperial Shelving Systems
Imperial Shelving is the ideal solution for all your filing needs. Shelving unique space saving design saves floor space when compared to conventional filing equipment. Maximize your file storage while using minimal floor space. Boltless design allows for quick and easy assembly. Available as Starter and Adder units. Double entry and single entry units available. Standard units contain five dividers per opening. Polyethylene feet protect your flooring and carpet.
Boltless Design.Imperial Shelving can be used within the office environment anywhere end-tab filing is used. It makes files more visible when using a color-coding system, and more accessible by keeping them upright and orderly. Imperial’s unique construction offers a smooth, clean, attractive appearance.
We also offer three options to secure business and medical documents. Choose from Hinged Style Locking Doors, Sliding Locking Doors or Rollup Locking Tambour Door. Door options can be added to new or existing installations. Each meets HIPAA healthcare privacy regulations for safeguarding personal health information.
Large dividers offer the right combination of end tab folder visibility and easy retrieval.
Its unique design conceals supports and keyhole slots.
Sliding Reference Shelf. (Note: Reduces filing space by 1".)
Imperial Shelving Systems Specifications
Materials: Imperials as well as all Tennsco products are fabricated of high quality, cold rolled carbon steel, free of scale or rust and fully pickled. Exposed edges, corners and surface areas are free of sharp edges and all workmanship is of the highest quality as measured by the industry.
Finish: All steel components shall be thoroughly cleaned and phosphatized for rust resistance in a five-stage pre-treatment process. A high grade of polyester/epoxy powder paint is to be applied electrostatically with a gloss reading of between 55 and 65. The finish shall have a salt spray rating of 250 hours or more.
Open Upright: Open uprights are formed of 18 gauge cold rolled steel, rolled into a 2" hollow "T" or 1" wide hollow "L" shape, with key-slot holes punched on 1-1/2" centers along the inner wall only. There are no holes on the face of the post. The front and back post are joined by welding three 18 gauge spacers, giving required depth and adding rigidity. The center space is a 3" high flat strip. Top and bottom spacers have an 11/16" stiffening flange with two 1/4" holes to allow securing to floor or mobile base. The "T" uprights are used as a common upright between units and "L" uprights for row ends.
Closed Upright: Closed uprights have same specification as open upright except the 18 gauge spacers are replaced by welding a full-length 24 gauge closure sheet with a special offset stiffener flange at the bottom of the closure sheet. The flange has two 1/4" holes to allow securing to floor or mobile base.
Shelf: Shelves are formed of 22 gauge cold rolled steel with a 5/32" deep channel formation on all sides. Return flange is formed to 120 degrees to permit easier installation. Shelves 12" deep or less are 20 gauge. Slotted shelves have shelf divider slots on 2" centers. Outer most slots coincide with the inner edge of the posts so a file divider can be used to provide a flush condition with the post at the shelf edge.
Shelf Support: Shelf supports are formed of 14 gauge hot roll pickled steel, 11/16" high with flat ears at either end. Semitubular rivets with 7/16" diameter head is staked onto ears.
Back Stop: Back stops are formed of 18 gauge steel with a 7/16" stiffener flange at bottom. It’s face is slotted on same centers as shelf to receive and retain file divider tabs. Ends have one shoulder rivet with 7/16" diameter head. Rivets are set in keyholes on inner wall of back upright posts. Back stops also act as stop for files and are used on single entry only.
Easy, Tool-Free Assembly - Imperial’s unique Keyhole Slot design offers time saving snap-together assembly without tools.
Expandability - Attach any number of add-on units with "T" posts to create a continuous row of files
Pre-configured Units - Individual units are available in 76" and 88" heights and widths of 36" in letter and legal depth and 48" in letter depth only. Everything you need is packaged in one or two cartons.
Super Strong Framework - Steel shoulder rivets, combined with steel uprights and shelf supports, offer up to 400 lbs. capacity per shelf, depending on size.
Large, Adjustable Dividers with Backstop - Extra-large 7½" high by 10½" deep shelf dividers adjust in 2" increments and keep folders upright, while backstop keeps folders from falling off shelf.
No Sway Braces Required - Rigid framework requires no nuts, bolts or sway braces for obstacle-free access to files.
Adjustable Steel Shelves - Shelves adjust vertically in 1 ½" increments to fit your exact requirements.
Double Wall Uprights - Double wall post construction conceals the keyhole slots for a clean, attractive appearance. Welded steel panel between posts provides a clean look.
Protect Your Flooring - Carpet friendly molded PolyEthylene feet protect your flooring and carpet.
Finishes: All shelving units are painted with a tough, baked-on enamel finish to ensure years of lasting beauty.